GK960 RGB Backlight plus Logo Version Keyboard
Product Information
Specifications:
- Model: Keyboard GK960 (RGB Backlight + Logo Version)
- Connection Modes: Bluetooth, USB, 2.4G
- Backlight Effects: Static, Breathing, Running Horse, Window
Opening, Seven-color Flowing Light, Single-color Flowing Light - Brightness Levels: 100%, 60%, 30%, OFF
- Lighting Speed Settings: 5 levels
- Logo Color Options: Red, Green, Blue, Yellow, Cyan, Purple,
White, Red-Green-Blue (RGB)
Product Usage Instructions
Switching Between BLE and USB Modes:
To switch between Bluetooth and USB modes:
- Press and hold Fn + 1 for a short time to enter Bluetooth
channel BT 1. Hold for two seconds to enter pairing mode. - Repeat the above step for Bluetooth channels BT 2 and BT
3. - Press Fn + 5 to enter USB mode.
Backlight and Lighting Effects:
- Toggle backlight: Press Fn + BackSpace.
- Restore backlight to factory settings: Hold FN + ESC for three
seconds. - Toggle lighting effects: Press Fn + Insert.
- Adjust brightness: Fn + PageUp (increase) / Fn + PageDown
(decrease). - Adjust lighting effect speed: Press Fn + -_.
Additional Functions:
- Adjust backlight brightness and switch light effects with the
knob buttons. - Adjust computer multimedia volume and mute with the knob
buttons. - Power on and enter EMI test mode: Press Fn + F12.
- Switch LOGO colors: Press Fn + P to cycle through options.
Frequently Asked Questions (FAQ)
Q: How do I know when the keyboard is fully charged in USB
mode?
A: When the keyboard is connected in USB mode, the mode light
will turn red during charging. Once charging is complete, the mode
light will return to its original color.
Q: How do I adjust the lighting effects on the keyboard?
A: Use the function keys as mentioned in the user manual to
toggle between different lighting effects and adjust brightness
levels accordingly.
Q: What is the default setting for the logo color
synchronization with the backlight?
A: The logo light and backlight are synchronized by default.
Press Fn + P to cycle through different logo color options.
New Product – Keyboard GK960 (RGB Backlight + Logo Version)
1. The keyboard key layout is as follows:
Brief Instruction Manual
2. Instructions for Switching between BLE and USB Modes:
Press and hold Fn + 1 for a short time to enter Bluetooth channel BT 1. Press and hold Fn + 1 for two seconds to enter the pairing mode
of BT 1, and the mode light will show blue. Press and hold Fn + 2 for a short time to enter Bluetooth channel BT 2. Press and hold Fn + 2
for two seconds to enter the pairing mode of BT 2, and the mode light will show purple. Press and hold Fn + 3 for a short time to enter Bluetooth BT 3 channel. Press and hold Fn + 3 for two seconds to enter the pairing mode of BT 3. The mode light will show cyan. Note: In BLE mode, the pairing setup time is 60 seconds. The mode light will flash to indicate. If the pairing is not successful within 60
seconds, the device will automatically shut down.
In 2.4G mode, the pairing setup time is 30 seconds. The mode light flashes to indicate. If the pairing is not successful within 10 seconds, it will automatically shut down.
(3) Press Fn + 5: Enter USB mode. The mode indicator light will be white.
The white light flashes, indicating that the user needs to connect the keyboard to the computer with a TYPE C data cable. The system is set to wait for 30 seconds for the USB to be inserted; if it exceeds 30 seconds, it will automatically shut down.
3. Fn + BackSpace: Toggle backlight.
Press and hold FN + ESC for three seconds to restore the backlight to the factory default settings.
Fn + Insert: Toggle lighting effects RGB Backlight Version: Set seven lighting effects to switch:
Static (red, yellow, green, indigo, blue, purple, white, multicolor) – The speed is not adjustable in this mode.
Breathing Iridescent Running Horse Window Opening Seven-color Flowing Light (default) Single-color Flowing Light Fn + PageUp: Increase the backlight brightness. There are four brightness levels available: 100%, 60%, 30%, and OFF. Fn + PageDown: Decrease the backlight brightness.
When adjusted to the maximum or minimum, the mode light flashes white three times as a prompt.
Press Fn + -_ to reduce the running speed of the lighting effect. There are five speed settings available.
Press Fn + += to increase the running speed of the lighting effect. When adjusted to the maximum or minimum, the mode light flashes white three times as a prompt. Fn + W: Enable/disable the function of swapping the “aswd” four keys with the arrow keys (up, down, left, and right). Fn + LeftWin: Lock/Unlock Win & app functions. This feature is only available on Windows systems. Fn + a: Select the Windows system keycap. The mode indicator light flashes white three times to indicate a successful switch, and the backlight flashes blue three times. Fn + s: Select the MAC system keycap. The mode indicator light flashes white three times to indicate a successful switch, and the backlight flashes yellow three times. Fn + Knob Key: The knob and knob key switch between the following two sets of functions:
Knob functions
Functions of the buttons under the knob Explanation
1
Adjust the backlight brightness.
Switch light effects
Default value
2
Adjust the volume of the computer’s multimedia.
Computer mute on/off
5. Press the Fn + F12 keys to power on and enter the EMI test mode. After entering the EMI mode:
Press FN + Z to switch to EMI test mode. Press FN + C to switch EMI test channels. Press FN + Q to restore factory settings.6. Press Fn + P to switch LOGO colors in sequence. There are 10 options available.
: The LOGO light and backlight are synchronized by default.
~ : Correspond to red, green, blue, yellow, cyan, purple, white, and red, green and blue.
: Turn off the LOGO light
7. When the keyboard is used in USB (or USB adapter) mode, the built-in lithium battery of the keyboard will be charged automatically. If the keyboard is in a connected state, the mode light will turn red. In other states (such as pairing, reconnecting, etc.), the mode light will remain the corresponding color. Once the charging is complete, the mode light will return to its original color.
If charging is done when the device is turned off, the mode light will still show red. When the battery is fully charged, the mode light will automatically go out.
When the keyboard is in operation without charging and the battery power is low, the mode light will turn red and flash slowly to indicate that it needs to be charged.
9. Definition of F1-F12 Function Keys:
Combination key FN+F1 FN+F2 FN+F3 FN+F4 FN+F5 FN+F6 FN+F7 FN+F8 FN+F9 FN+F10 FN+F11 FN+F12
WIN
Press only once.
Reduce the screen brightness
F1
Increase the screen brightness
F2
Press ALT + TAB to switch windows. F3
Press WIN + H to open the microphone. F4
Multimedia
F5
Previous track
F6
Next song
F7
Play/Pause
F8
Stop.
F9
Mute
F10
Volume down
F11
Volume up
F12
MAC
Reduce the screen brightness Increase the screen brightness Multi-task control window
Launch pad Call up Siri.
Screenshot Previous song / Rewind
Play/Pause Next song / Fast forward
Mute Reduce the global volume Increase the overall volume.
9. The basic electrical performance is as follows:
4.2 volts
Work status
(Within 2 minutes)
Standby (2 minutes later)
Deep hibernation
White light Turn on the backlight (eight RGB lights) Turn off the backlight.
Automatic backlight off
In 15 minutes
USB mode
240mA
17mA
no
no
BLE mode
128mA
11mA
3.5 milliamps
33uA
Note: The above test results may vary depending on the number of LED beads in the backlight strip and are for reference only. By default, the system will enter a dimmed standby mode after 2 minutes of no keyboard activity, and go into deep sleep mode after 15 minutes.
Notes:
This Bluetooth keyboard and mouse device is based on the BLE5.1 Bluetooth protocol stack. The corresponding Bluetooth BLE receiver version must also be above BLE5.0. If a lower version Bluetooth receiver (such as Using Bluetooth versions such as BLE4.0/4.1/4.2 may lead to various issues (e.g., failed reconnection, inability to wake up, etc.). Please ensure that the version of your Bluetooth receiver is BLE5.0 before use. That’s all.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure statement The device has been evaluatec to meel general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 |
Shenzhen GK960 RGB Backlight plus Logo Version Keyboard [pdf] Instruction Manual 2BEBK-GK960, 2BEBKGK960, GK960 RGB Backlight plus Logo Version Keyboard, GK960, RGB Backlight plus Logo Version Keyboard, Backlight plus Logo Version Keyboard, Logo Version Keyboard, Keyboard |